1. Home
  2. Products
  3. Horizontal Machining Centers

Products

Horizontal Machining Centers

TI Series

Low profile independent chuck
TI Series

Low profile independent chuck TI series
The TI series is a thin-type independent chuck that can be used with chuck sizes from 12“ to 39” (φ300 to φ1000). It can be used with a variety of machines, such as angle plates (equerre) and machining center tables, as well as 5-axis machining center tables.
・Cast iron body
・Chuck size: 12“ to 39” (φ300 to φ1000)
・The cover on the top makes it difficult for chips to enter the inside.
・Lightweight and thin design has minimal impact on the maximum loading capacity and height of the machine.
  • Horizontal lathes
  • Vertical lathes
  • Horizontal MCs
  • Vertical MCs
  • 5-axis MCs
TM Series

3/4/6 Jaws scroll chuck low profile light weight type TM Series

3/4/6 Jaws scroll chuck low profile light weight type TM series
3/4/6 Jaws scroll chuck low profile light weight type TM series is a lightweight, thin chuck with a chuck size of 12“ to 39” (φ300 to φ1000). It can be attached to angle plates (equerre), machining center tables, and 5-axis machining center tables.
・Cast iron body
・Chuck size 12“ to 39” (ø300 to ø1000)
・Cover on the upper surface of chuck to prevent chips from entering.
・Lightweight, low-profile design has minimal impact on the maximum load capacity and height of the machine.
・Can be attached to angle plates (equerre), machining center tables, and 5-axis machining center rotary tables.
  • Horizontal lathes
  • Vertical lathes
  • Horizontal MCs
  • Vertical MCs
  • 5-axis MCs
Power Wrench & Power Wrench Chuck

3 Jaw power chuck & power wrench

3 Jaw power chuck & power wrench
Power Wrench/Power Wrench Chuck is a system that automatically tightens the pinion of the scroll chuck using a hydraulic power wrench or electric power wrench, instead of manually. This can be added as a special specification to all of our scroll chucks.
・The chuck body is made of cast iron.
・This is a system that automatically tightens the scroll chuck pinion using a hydraulic power wrench or electric power wrench, instead of tightening it manually.
・Hydraulic power wrench PW-H24.
・This can be added as a special specification to all of our scroll chucks.
  • Horizontal lathes
  • Vertical lathes
  • Horizontal MCs
  • Vertical MCs
BM Series

Boring mill jaws
BM Series

Boring mill jaws BM series
The BM series is a boring mill jaw that can be attached to large lathes, vertical lathes, boring machines, milling machines, jigs, etc. We have a range of sizes available, from small to large. It can be attached using T-bolts in sets of four. A handle is included.

・Can be attached to large lathes, vertical lathes, boring machines, milling machines and jigs.
・Available in small to large sizes.
・Attach with T-bolts in sets of four. Handle included.


BM-3T : 29 kN
BM-4T : 39 kN
BM-4T-2P : 39 kN
BM-6T : 59 kN
BM-7T : 68 kN
  • Vertical lathes
  • Horizontal MCs
  • Vertical MCs
FD105

Compact, lightweight index table TOUCHDEX FD-105

Compact, lightweight index table TOUCHDEX FD-105
The TOUCHDEX FD-105 is a palm-sized, ultra-thin, lightweight, compact mechanical indexing device. Multiple units can be mounted on a machining center to process small workpieces. Minimum indexing angle: 15 degrees, maximum indexing angle with one push: 45 degrees.

・World-class compact design
・Can be mounted on multiple small machining centers
・Table diameter: 105 mm
・Main unit thickness: 60 mm
・Weight: 4.5 kg
・One-push indexing angle: 45 degrees
・Minimum indexing angle: 15 degrees
There are two types: one with a base and one without.
  • Horizontal MCs
  • Vertical MCs
FD107

Super-compact index table MINI TOUCHDEX FD-107

Super-compact index table MINI TOUCHDEX FD-107
The Mini TOUCHDEX FD-107 is a compact, lightweight mechanical index table. It can be mounted on multiple small machining centers, etc., to enable machining of small workpieces. The minimum indexing angle is 15 degrees, and the maximum one-push indexing angle is 45 degrees.

・ Table diameter: 107 mm
・ Lightweight: Compact design
・ Weight: 13kg
・ One-push indexing angle: 45 degrees
・ Minimum indexing angle: 15 degrees
  • Horizontal MCs
  • Vertical MCs
FD/FDM Type

Index table TOUCHDEX FD/FDM type (φ210 or less)

Index table TOUCHDEX FD/FDM type (φ210 or less)
The TOUCHDEX FD/FDM type is a mechanical, compact index table with a table size of 8” (ø210 mm) or less. The maximum indexing angle per push is 45 degrees, and the minimum is 5 degrees. The FD type is for vertical mounting only, and the FDM type is for both vertical and horizontal mounting.
Table diameter: 210 mm or less

・Maximum indexing angle per push: 45 degrees
・Minimum indexing angle: 5 degrees
・FD type: For vertical mounting only
・FDM type: For vertical and horizontal mounting (compatible)
  • Horizontal MCs
  • Vertical MCs
FD/FDM Type

Index table TOUCHDEX FD/FDM type (φ230 or more)

Index table TOUCHDEX FD/FDM type (φ230 or more)
The TOUCHDEX FD/FDM type is a mechanical index table with a table size of 9.2” (Φ230 mm or more). Minimum indexing angle: 1 to 5 degrees, maximum one-push indexing angle: 45 degrees. The FD type is for vertical mounting only, and the FDM type is for both vertical and horizontal mounting.

・ Table diameter: 230 mm or more
・ One-push maximum indexing angle: 45 degrees
・ Minimum indexing angle: 5 degrees
・ FD type: For vertical mounting only
・ FDM type: For both vertical and horizontal mounting
  • Horizontal MCs
  • Vertical MCs
FDK 450

Large size Index table TOUCHDEX FDK-450

Large size Index table TOUCHDEX FDK-450
The TOUCHDEX FDK-450 is a large-size index table with a table size of 18” (ø450 mm) and a center hole diameter of ø120 mm. Minimum indexing angle of 5 degrees. Equipped with a rotation holding function as standard.

・Table diameter: 450 mm
・Large center hole diameter: 120 mm
・Equipped with rotation holding function as standard equipment
・One-push maximum indexing angle: 45 degrees
・Minimum indexing angle: 5 degrees
  • Horizontal MCs
  • Vertical MCs
FDMK Type

High rigidity index table TOUCHDEX FDMK type

High rigidity index table TOUCHDEX FDMK type
The TOUCHDEX FDMK type is a precision index table with a table size of 6.8“ to 13.6” (ø170 to ø340 mm) and a center hole diameter of ø37 to ø100. Minimum indexing angle 1 to 5 degrees, maximum indexing angle 90 degrees, and a rotating holding function are standard-equipped.
The FDM type is equipped with a holding function as standard.

・Table diameter: 6.8“ to 13.6” (170 to 340 mm)
・Large center hole diameter: 1.5“ to 3.9” (37 to 100 mm)
・Standard rotation holding function
・Minimum indexing angle: 1 to 5 degrees
・Maximum indexing angle: 90 degrees
  • Horizontal MCs
  • Vertical MCs
TL Type

Index table for 5-axis machining Tilting TL type

Index table for 5-axis machining tilting TL type
The TL type tilting unit integrates two indexes and enables the table tilt and table rotation necessary for 5-sided machining on vertical machining centers. Table sizes from 4“ to 9” (ø105 to ø230 mm) are available.

・ Integrates two TOUCHDEX units.
・ Enables 5-sided machining on vertical machining centers.
・ The table tilt and table rotation are automatically performed by the push bar of the TOUCHDEX.
・ The footprint is extremely compact.
・ Table diameter: 4“ to 9” (105 to 230 mm)
  • Horizontal MCs
  • Vertical MCs
FDV Type

Index table with plate VISEDEX FDV type

Index table with plate VISEDEX FDV type
The Visedex FDV type is a unit for machining centers that enable to combine a machining vice and index. It enables 3-sided machining with a single installation, and achieves highly efficient machining of small workpieces.

· By attaching the end support and base, 3-sided machining of multiple workpieces can be achieved at once.
· 3-sided machining can be done at once with a single installation, making it economical.
· Due to the rotary indexing, chips are easily removed.
· The FDV-164 comes standard with soft jaws, and during machining, the soft jaws are self-cut to grip the workpiece, ensuring high precision.
· Manual unit comes standard.
  • Horizontal MCs
  • Vertical MCs
TOUCHDEX Options

TOUCHDEX Options - Index table Options

TOUCHDEX Options - Index table Options
This page introduces optional products for Kawatatec's indexer “TOUCHDEX”. These include manual handles, tailstocks, end supports, scroll chucks, guide blocks, etc.

・Manual handle: A handle for manually indexing
・Tailstock: For holding cylindrical or bar workpieces
・End support: A special jig used in conjunction with TOUCHDEX
・Scroll chuck: Can be attached to the TOUCHDEX table
・Guide block: Positioning block for TOUCHDEX
  • Horizontal MCs
  • Vertical MCs
KAWATATEC Corp.
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.